Home
About Us
The Environment
Contact Us
Distributor Locator
Resources
What's New
Events
Newsroom
Video
Social Media
SPECIALTY POLYMERS
FILTERFAB
FilterFAB 300
FilterFAB 300 In Action
FilterFAB 1000 BLK
FilterFAB 2000
FilterFAB 2000 In Action
FilterFAB 2020
FilterFAB 2500 FOAM In Action
FIBERGLASS FILM FORMERS & BINDERS
K-80-203
FORMULATORS
Covinax 081-00
Covinax 169-00
Covinax 210-00
Covinax 220-00
Covinax 271-00
Covinax 324-00
Duracet 12DB
Duracet 30
Duracet 300
Micronax 243-00
Multibond 1P2
NON-WOVEN BINDERS & MODIFIERS
Duracet 12DB
Duracet 827
Duracet 864
Duracet 898
FAQS
GLOSSARY
Covinax 220
Covinax 220
PRODUCT DESCRIPTION
Covinax 220 is a vinyl acrylic copolymer stabilized with polyvinyl alcohol colloid. This vinyl acrylic copolymer was designed to bond synthetic films, such as polyvinyl chloride, Mylar and cellophane. Covinax 220 finds application in casing-in and padding glues and heat seal adhesives.
PHYSICAL PROPERTIES
ADDITIONAL INFORMATION
FILM PROPERTIES
Dry films of Covinax 220 are flexible and tack-free with good gloss and clarity. Water resistance is fair. Plasticizer resistance is poor.
COMPOUNDING INFORMATION
Covinax 220 can be thickened, using partially hydrolyzed polyvinyl alcohol. This thickening technique will retain the linear flow properties and enhance the wet-tack. For moderate to high viscosities, cellulosic thickeners may be used. Solvents, such as toluene and methyl ethyl ketone will also thicken Covinax 220. The specific adhesion and tack of Covinax 220 can be increased using dibutyl phthalate, chlorinated paraffin or proprietary plasticizers.
Covinax 220 conforms compositionally with FDA Regulation 21 CFR 175.105, 21 CFR 176.170, and 21 CFR 176.180.
IMPORTANT NOTICE TO CUSTOMER:
The recommendations and data contained in this Product Data Sheet for use of this product are based on information Franklin believes to be reliable. They are offered in good faith without guarantee, as conditions and methods for use of our product by Customer and are beyond Franklin’s control. Customer must determine the suitability of the product for a particular application before adopting it on a commercial scale.
All orders for Franklin products shall be subject to Franklin International, Inc.’s Standard Terms and Conditions of Sale which may be found at
http://franklini/Terms_and_Conditions.aspx
(“Standard Terms”). Different or additional terms proposed by Customer are expressly rejected and shall not become part of the agreement between Customer and Franklin International, Inc. with respect to any order. Contact Franklin International, Inc. immediately if you cannot access our Standard Terms and we will provide you a copy upon request. Any sale of products by Franklin to Customer is expressly conditional upon Customer’s consent to the Standard Terms, and Customer’s acceptance of any performance by, or receipt of products from, Franklin International, Inc. shall constitute Customer’s acceptance of the Standard Terms and Conditions of Sale.
Copyright 2012.© All rights reserved. Franklin International. Revised 08/16/12.